20
Reference & Installation Manual
The signal strength can also be verified by performing a
system test. See Quick Setup on page 4 for more
information.
Assigning Remote Controls
The Magellan console accepts up to 16 fully programmable
remote controls. Every User code can have one remote control
assigned to it.
To assign a remote control:
1.
Press [
MENU
] + [4] + [2].
Programming the Remote Control’s Buttons
Sections [041] to [056]: Users 1 to 16; Remote Controls 1 to 16
Sections [041] to [056] represent the remote controls assigned to
User codes 1 to 16 (see table below).
The remote control will transmit a signal for only 1 second when
a button is pressed and held for 1 second. This is done to
conserve the remote control’s batteries.
Although remote controls can be assigned by the System
Master, the remote control’s buttons are programmed by the
installer.
Each remote control can be programmed to perform different
actions. Each digit in sections [041] to [056] represents a button
or combination of buttons (see table below).
To program a remote control’s buttons:
1.
Access the installer programming mode (see page 13).
2.
Enter the [
SECTION
] (sections [041] to [056]) corresponding
to the desired remote control.
3.
Enter the [
HEXADECIMAL
VALUE
] (0 to F) of the desired button
option from the Button Options Table on page 23.
If you do not wish to program all the buttons or button
combinations, press the [#] key at any time to save and exit.
If you enable any Panic button options, you must enable the
Panic options in the control panel (refer to Panic Alarms on
page 26).
Programming the MG-REM1/MG-REM2
Warning: When section [040] is accessed, the console will copy the saved value of that section to all remotes.
Section
RC#
Data (Default: 4DE0)
Section
RC#
Data (Default: 4DE0)
[040]
Default
1-16
______
______
______
______
[041]
1
______
______
______
______
[049]
9
______
______
______
______
[042]
2
______
______
______
______
[050]
10
______
______
______
______
[043]
3
______
______
______
______
[051]
11
______
______
______
______
[044]
4
______
______
______
______
[052]
12
______
______
______
______
[045]
5
______
______
______
______
[053]
13
______
______
______
______
[046]
6
______
______
______
______
[054]
14
______
______
______
______
[047]
7
______
______
______
______
[055]
15
______
______
______
______
[048]
8
______
______
______
______
[056]
16
______
______
______
______
+
+
+
+
Summary of Contents for MG-6130
Page 2: ......