DigiplexNE Grafica Keypad Module 5
n
2.3 MOUNTING THE METAL WALL PLATE
1) Place metal wall plate to desired position.
2) Drill and insert screws into holes labeled “A” as shown in Figure 3.
Figure 3: Metal Wall Plate
2.4 CONNECTING GRAFICA
You can connect Grafica to the DigiplexNE control panel’s
communication bus in a star and/or daisy chain configuration. The
communication bus consists of four wires that provide power and
two-way communication between the control panel and all modules
connected to it. Connect the four terminals labelled
RED
,
BLK
,
GRN
and
YEL
of the module to the corresponding terminals on the control
panel as shown in Figure 4 on page 6. Please refer to the
DigiplexNE
Installation & Reference Manual
for maximum allowable installation
distance from the control panel.
A
A
A
B
B
C
(for clip)
(Used also for electrical box)
A
A
(Used also for electrical box)
