manualshive.com logo in svg

Paradox Digiplex NE DGP-NE96, Programming Manual

The Paradox Digiplex NE DGP-NE96's advanced features can be fully maximized with the comprehensive Programming Manual available for free download at our website. This manual provides detailed instructions on how to program and operate the system, ensuring optimal performance and security for your home or business.

Share
Download
background image

DigiplexNE DGP-NE96  

  

 - 50 - 

    

Programming Guide

CONNECTING THE BUS IN NOISY ENVIRONMENTS

When installing  the bus  wires  in  proximity to high electrical interference  such as neon  lights,  motors, high-voltage  wiring,  transformers, or if connecting the
bus across separate buildings, you must use shielded cables. Connect the shielded cable as detailed below:

Within the Same Building:

 Strip the outer jacket at one end of the shielded cable to expose the shield and connect the shield to the control panel ground

(not the dialer ground), while leaving the shield at the other end of the cable open (floating).

Across Separate Buildings:

 Strip the outer jacket at one end of the shielded cable to expose the shield. In the same building that houses the control panel,

connect the exposed shield to a cold water pipe or any other earth ground available, while leaving the shield at the other end of the cable open (floating). The
same configuration applies to any subsequent building.

BUILT-IN RTC

DigiplexNE incorporates an RTC directly on the PC board. The RTC will save DigiplexNE’s internal clock when both the AC and battery power have been
lost.  After power is  lost  and then restored, DigiplexNE will  verify with and  then  retrieve  the time from the RTC. The control  panel will verify and compare its
time with the time stored in the RTC every hour. If the times are different, DigiplexNE will reset its internal clock to the time  saved in the RTC. The RTC uses
a 3V lithium battery (CR2032) with a battery life of 11 years. Change the battery as shown below:

NOTES
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________

Reprogram the  control panel’s  clock after changing  the battery. 

WARNING! Danger of explosion exists if the  lithium battery is incorrectly replaced.
Replace  only with  the same  or equivalent  type  recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.

Summary of Contents for Digiplex NE DGP-NE96





















































Reviews:

No comments

Related manuals for Digiplex NE DGP-NE96

OCO 2 Instruction preview
2
Brand: OCO Pages: 11
D-Link DCS-936L Quick Install Manual preview
DCS-936L
Brand: D-Link Pages: 8
FED 5 Owner'S Manual preview
5
Brand: FED Pages: 5
3xLogic VX-VTOF-01 User Manual preview
VX-VTOF-01
Brand: 3xLogic Pages: 25
3xLogic VX-2A-B-IWD (R) Hardware And Installation Manual preview
VX-2A-B-IWD (R)
Brand: 3xLogic Pages: 80
U-Prox PIR Quick Start Manual preview
PIR
Brand: U-Prox Pages: 3
M-system ASL Instruction Manual preview
ASL
Brand: M-system Pages: 3
VADDIO ZOOMSHOT 20 User Manual preview
ZOOMSHOT 20
Brand: VADDIO Pages: 20
VADDIO WallVIEW CCU HD-18 HD-SDI Installation And User Manual preview
WallVIEW CCU HD-18 HD-SDI
Brand: VADDIO Pages: 18
VADDIO RoboSHOT 12 User Manual preview
RoboSHOT 12
Brand: VADDIO Pages: 60
Vacron VVH-MDE304 Quick Start Manual preview
VVH-MDE304
Brand: Vacron Pages: 2
VADDIO CLEARVIEW HD-18 Manual preview
CLEARVIEW HD-18
Brand: VADDIO Pages: 4
Invision IQeye Sentinel Series Installation And Operation Instructions Manual preview
IQeye Sentinel Series
Brand: Invision Pages: 20
Renkforce 2108038 Operating Instructions Manual preview
2108038
Brand: Renkforce Pages: 8
Fisher digital slim -1400 Instruction Manual preview
digital slim -1400
Brand: Fisher Pages: 20
Visonic NEXT PLUS Series Installation Instructions preview
NEXT PLUS Series
Brand: Visonic Pages: 4
V-TAC VT-5123 Installation Instruction preview
VT-5123
Brand: V-TAC Pages: 9
Bogen AFDS2 Specifications preview
AFDS2
Brand: Bogen Pages: 2

Brands by name

Popular brands

Load more brands