DigiplexNE DGP-NE96
- 41 -
Programming Guide
Download Memory Key to Control Panel.
1)
Insert the
Memory Key
(PMC-3) onto the control panel’s connector labelled “
M EM
KEY
”.
2)
To download the contents of the
Memory Key
except
sections
[0001]
to
[0096]
and
[0501]
to
[0532]
, enter installer programming
mode and then enter section
[4010]
.
To download the contents of the
Memory Key
including
sections
[0001]
to
[0096]
and
[0501]
to
[0532]
, enter installer programming
mode and then enter section
[4011]
.
3)
When the keypad emits a confirmation beep, remove the
Memory Key
.
Copy Control Panel to Memory Key
1)
Insert
Memory Key
(PMC-3) onto the control panel’s connector labelled “
ME M
KE Y
”. Ensure the write protect jumper on the memory
key is on.
2)
To copy the contents to the
Memory Key
except
sections
[0001]
to
[0096]
and
[0501]
to
[0532]
, enter installer programming mode,
then enter section
[4020]
.
To copy the contents to the
Memory Key
including
sections
[0001]
to
[0096]
and
[0501]
to
[0532]
, enter section
[4021]
.
3)
After the confirmation beep, remove the
Memory Key
. Remove the
Memory Key
’s jumper if you do not wish to accidentally overwrite
its contents
.
AUTOMATIC REPORT CODE PROGRAMMING
When using Contact ID or SIA Reporting formats (section
[3070]
on page 32), default report codes can be programmed automatically. After automatic
defaults are set, they can be changed and the remaining report codes can be set manually.
SOFTWARE RESET
Performing a software reset will set certain parameters to default values. To do so:
1)
Make sure the
“
RE SET
”
jumper (see page 49) on the control panel is ON.
2)
Enter Programming Mode (see page 1).
3)
Enter the 4-digit
[
S ECTION
]
corresponding to the software reset you wish to perform:
Section
Description
[4030]
A
LL
R
EPORT
C
ODES
R
ES ET
TO
00
Resets all the report codes from sections
[0201]
to
[0296]
,
[0701]
to
[0832]
,
[2001]
to
[2199]
and
[3900]
to
[3999]
to 00.
Sections
[4031]
to
[4037]
reset all the report codes in the following sections to the
default values from the
“Automatic Report Codes List”
on page 42:
[4031]
A
LL
R
EPORT
C
ODES
R
ES ET
TO
FF
[0201]
to
[0296]
,
[0701]
to
[0832]
,
[2001]
to
[2199]
&
[3900]
to
[3999]
[4032]
Z
ONE
A
LARM
/A
LA RM
R
ESTORE
AND
Z
ONE
T
A MPER
/T
A MPER
R
ES TORE
R
EPORT
C
ODES
[0201]
to
[0296]
[4033]
U
SE R
/K
EYS WITCH
A
RMING
& D
ISARMING
R
EPORT
C
ODE S
[0701]
to
[0832]
, and
[2001]
to
[2199]
[4034]
S
PECIAL
C
ODES
[3900]
to
[3909]
[4035]
S
PECIAL
A
RMING
/D
ISA RM ING
R
EP ORT
C
ODES
[3910]
to
[3929]
[4036]
S
PECIAL
A
LARM
R
EPORT
C
ODE S
[3930]
to
[3939]
[4037]
T
ROUB LE
& T
ROUBLE
R
ES TORE
R
E PORT
C
ODES
[3940]
to
[3999]
Section
Description
[4040]
Entering this section will reset all programmable sections from
[0001]
to
[3999]
to factory default values.
[4041]
Entering this section will reset the system master code to 123456.
[4042]
Entering this section will reset all Zone (sections
[0001]
to
[0196]
,
[0201]
to
[0296],
and sections
[0961]
to
[0984]
) programming to default
values.
[4043]
Entering this section will reset all access control sections from
[2201]
to
[2712]
, excluding door labels, to default values.
[4044]
Entering this section will reset all user code sections from
[1001]
to
[1999]
and
[2001]
to
[2199]
to default values.
[4045]
Entering this section will reset all dialer (sections
[3051]
to
[3081]
) and control panel (sections
[3020]
to
[3043]
, and
[3900]
to
[3991]
)
programming to default values.
[4046]
Entering this section will reset all partition sections from
[3101]
to
[3829]
, excluding partition labels, to default values.
[4047]
Entering this section will reset all PGM (sections from
[0901]
to
[0939]
) and all Keyswitch (sections
[0501]
to
[0632]
) programming, as well as
all Keyswitch arming/disarming report codes (sections from
[0701]
to
[0832]
)
to default values.
[4048]
Entering this section will clear all user labels, door labels, partition labels, and zone labels from sections
[0301]
to
[0396]
.
