
Digiplex LCD Keypad’s 11
3.4.1 Multiple-action
The Multiple-action feature permits you to complete more than one action
after entering the User Menu. If your installer has enabled this feature, the
LCD screen will return to the User Menu after each action so you may
perform another action without having to re-enter your
User Access Code
.
Press the
button to exit the User Menu.
3.5 P
ARTITIONED
S
YSTEM
Your installer can design your system to recognize up to four
separate protected areas. A separated system is called a
Partitioned System, which can be useful in situations where
shared security systems are more practical. For example, a
company that has both an office area and a warehouse area can
arm and disarm each area separately and control the access to
each area. Therefore, one person may have access to only one
area, whereas another person may have access to all areas.
Access to the areas is determined by the
User Access Code
.
3.6 A
REA
S
TATUS
D
ISPLAY
In Area Status Display you will be able to see the status of the
areas in a
Partitioned System
(see section 3.5) for the area(s) the
keypad is assigned. If your LCD screen is in
Confidential Mode
(see section 3.3.2), you must first press a button or enter your
User Access Code
to activate
Normal Mode
depending on how
your keypad is programmed.
Summary of Contents for Digiplex DGP-641
