GXL-45 Operator Manual
Safety Considerations
•
5
Tank Requirements
The LP cylinder used with this grill must be no larger than 20 lb. capacity with 11” water column, and have:
•
Type 1 outlet compatible with the grill gas regulator and a safety relief device having direct
communication with the vapor space of the cylinder
•
UL listed Overfill Protection Device (OPD). This OPD safety feature is identified by a unique triangular
hand wheel.
Use only LP cylinders equipped with this type of valve
•
A collar to protect the cylinder threads on the customer supplied tank
•
When not in use, the tank shut off valve should be turned off
Filling and Refilling LP Gas Cylinders
All purging and refilling of LP gas cylinders must be performed by
qualified personnel in the LP gas industry. Never store a spare LP gas
cylinder under or near this appliance.
Never fill the LP gas cylinder beyond 80 percent full. Failure to follow
these instructions may result in explosion, personal injury, or death.
If a gas leak cannot be stopped by closing the LP cylinder valve,
immediately leave the area and call the fire department!
To replace an LP gas cylinder:
1.
Turn all burner knobs to OFF and close the LP cylinder valve
2.
Disconnect the regulator hose from the LP cylinder
Figure 1 LP Cylinder Valve
3.
Remove cylinder from the enclosure; have it replaced or filled at your local qualified propane dealer
4.
Connect the regulator valve
a.
Hold the regulator so it is aligned with the cylinder valve
b.
Thread the coupling nut onto the valve and tighten clockwise until there is resistance
