16
•
Grill Island Preparation
GS-SB1 Single Side Burner Operator Manual
Firm level surface:
Use your burner unit only on a firm level surface. This burner unit is not designed for use
in or on a recreational vehicle, and should not be installed or used on a boat, marine craft, or other moving
conveyance.
Propane tank mount:
Your island must be equipped with a propane tank mounting bracket for a 20 lb.
cylinder. See Customer Required Items.
Gas supply line:
Pay careful attention to the gas line location. It should be routed away from sources of
heat, sharp edges and rough surfaces, and should make as few bends as possible.
Gas supply access:
When your Single Burner is installed, you should have clear access to the gas supply line
including the gas piping or hose, gas regulator, gas cylinder and any shutoff valves. A safety shutoff valve is
required at the gas supply connection point.
Partial enclosures:
Many backyards have areas that are partially closed off, such as balconies and pergolas.
In some cases, it is hard to decide whether these partially enclosed areas should be classified as indoor
areas, particularly in terms of permanent (non-closable) ventilation. If you are in doubt, consult your local
codes or a licensed contractor for guidance.
Measure:
Always have equipment measured by a Contractor before building. Measure to ensure the
opening is not bigger than the outside frame of the burner unit (Figure 6); the burner unit edges must rest
on the lip of the frame.
Figure 6 Burner Unit fits in Island Frame
