Page 9 of 33
Issued: 2022-11-01
Rev. 2
4FT LIFT RANGE:
1-A)
Bolt on the inner cross tubes:
1-B)
Bolt on the range extenders (Item 3) with
the bolts on the inside of the H-frame:
1-C)
Complete one side of an H-Frame:
(Front H-Frame shown)
1-D)
Repeat steps A-B for the other side:
(Rear H-Frame shown)
1-E)
Repeat Steps A-D for both the Front and Rear H-Frame assemblies.
1-F)
Torque the bolted connections to 56 ft-lbs and mark the nuts as torqued with the torque seal/
paint marker.
If bunk spacers are
already installed,
install range
extenders so that
the bunk spacers
face in on the
H-frame
WARNING!
Using the 3/4” wrenches:
