21
ANTHEM ROOM CORRECTION (ARC)
–
Persona 9H Only
(cont’d)
WHAT’S INCLUDED WITH ARC:
Your ARC Kit Includes:
• Microphone and microphone clip
• Telescoping stand and base
• 2 USB cables
Each microphone has its own unique factory-set calibration file. You can download your
microphone’s unique calibration file from
anthemav.com/arc
. Each microphone can only be
used with its unique matching calibration file.
Before you begin
• Ensure that the ARC software you are using, and the audio equipment you are using it with, are compatible. Check
anthemav.com/arc
for the latest software versions and the latest equipment compatibility list.
• Your ARC microphone and its calibration file work together as a pair. Before the microphone can be used by the
ARC software, its exact response must be known. So each ARC microphone’s frequency response is precisely
measured at the factory to create its unique calibration file. Download your microphone’s unique calibration file
from
anthemav.com/arc
.
• Your computer must be running Windows 7 or later. If you’re using a laptop computer, check its power settings and
battery meter to ensure that ARC procedures will not be interrupted.
• The ARC acoustic measurement process rejects typical background noise, but if loud noise is present it may
interfere with the ARC process. ARC may indicate that re-measurement is required. To avoid this, ensure that the
room being tested will be sufficiently quiet during measurement.
ARC Software Installation
• Download the latest software version to your computer desktop at
anthemav.com/arc
• Right-click on the downloaded .zip file folder and extract to desktop.
• Open the extracted folder and double-click on “Setup.”
• Software installation instructions will appear on your screen.
• Go to Start Menu and “run” ARC.
If you are downloading an ARC update, make sure the existing ARC program is closed on your computer before
installing a new version.
