10
CAUTION
Exercise care in handling equipment during inspection to prevent damage caused by
rough or careless handling.
1. Visually inspect the MAF 900-60S MCPA for damage that may have occurred
during shipment.
2. Check for evidence of water damage, bent or warped chassis, loose screws, nuts
or extraneous packing material in the connector(s).
CAUTION
Before applying power, make sure that all connectors to the MAF 900-60S are secure.
Make sure that the input and output of the amplifier is terminated to 50 ohms. Do not
operate the system without a load attached. Excessive input power may damage the
equipment.
If possible, inspect the equipment in the presence of the delivery person.
If the equipment is damaged:
•
The carrier is your first recourse.
•
A claim should be filed with the carrier once the extent of damage is assessed.
Careful, immediate inspection is important if the carrier is suspect of damage.
If the equipment is damaged and must be returned to the factory:
•
Contact your Paradigm Wireless Systems representative.
•
Paradigm Wireless Systems may not accept returns without an RMA.
5.6 Installation Instructions
Model MAF 900-60S MCPA is designed for use in a 900 MHz 2-way paging transceiver
radio base station. The host enclosure must permit access to the sub-rack for DC power,
RF and alarm cables as well as proper ventilation of sub-rack the assembly.