Paradigm GO10SW, Owner'S Manual

Page: 10 / 28

9 | EN
TEST SYSTEM
After all subwoofer and satellites connections are
completed, connect the wires to your receiver or amplifier .
IMPORTANT: Be sure not to let any stray’+’ and’-’ strands
touch each other . Touching strands will cause a short
circuit which could damage your amplifier .
Turn your receiver or amplifier ‘On’ and test the system with
your favorite music . If the subwoofer is operating properly,
refill the wire trench and enjoy your new subwoofer .
Subwoofer & Burial Cable Connections
To Subwoofer
To Amp
To Adjoining
Speaker
Combine and twist
(clockwise) the
wires (as shown
in the diagram)
from the amp,
subwoofer and to
the neighboring
speaker . Secure
these three wires
using the provided
Silicone Filled
Wire Caps . NOTE: You may have to cut some of the
speaker cable emanating from the subwoofer to a more
manageable size .
WIRING & SUBWOOFER INSTALLATION (CONT’D)