Paradigm Founder Series, Owner'S Manual

Page: 16 / 30

14
ANTHEM ROOM CORRECTION (ARC)
– Founder 120H Only
(cont’d)
MICROPHONE POSITIONING & CONNECTION
During all measurements,
the microphone must point
straight up.
The microphone’s height
is critical to proper
measurement. The
microphone should be
positioned at ear-level when
seated and should correspond
with the height of the high-
frequency drivers in the front
speaker array.
Incorrect microphone
positioning may result in a
dull or bright sound. Readjust
the microphone to seated
ear-level in line with the high-
frequency drivers and repeat
ARC measurements.
To adjust the length of the
telescoping tube, first loosen its clamp by rotating it counterclockwise; reposition, then rotate
clockwise to lock. Set the microphone in the first position. Don’t stand near the microphone
while sweep tones are playing, otherwise, reflections from your body may cause bad
measurements.
PAIRING
Founder 120H speakers have the ability to be set up as a pair. Once you pair two
Founder 120H speakers, you will be able to connect to both speakers simultaneously
to run ARC either via Bluetooth or USB connection.
All Founder 120H speakers start as a “Left” speaker from the factory and are
automatically looking to pair with a “Right” speaker. To set up a pair of 120H to run
ARC on, you need to set one up as a “Right” speaker. Speakers can only be paired if
they also share the same name.
When pairing multiple sets of 120Hs, you will need to use a different name for the
additional pairs of speakers. You can custom name your Founder 120H speakers up
to14 characters, as long as it matches the speaker that it is intended to pair with.
If using an odd number of speakers (ex: one as a center channel), follow the steps
below but rename it to something different in the pairing menu so it won’t attempt to
pair with the “Right” speaker.
1