- 15 -
Installation Guide
Connect100
1. Transmit (Tx) IFL (N-Type)
2. Control/Power
3. Receive (Rx) IFL (N-Type)
4. Monitor Port (F-Type)
1
4
3
2
Transceiver Port
Identification
1
4 3 2
Transceiver
Control LEDs
1.
Power:
a. Green:
Power On, Rx and Tx PLL locked
b. Red:
Power On, IF Overdrive Condition
c. Red (Blinking):
Power On, Rx and/or Tx PLL unlocked
2.
Polarity:
a. Red:
Tx = LHCP (Connect Series Antennas)
b. Green:
Tx = RHCP (Connect Series Antennas)
3 & 4. Frequency Band
3 = Green, 4 = Green: Low Band Tx.
3 = Green, 4 = Red:
High Band Tx.
LED 4 Colour will cycle during One Touch Commissioning (see
PIM Operators Manual)
