6
INSTALLATION
(continued)
Tabletop:
Required tools (Not included):
• Phillips screwdriver
Required tools (Included):
• Tabletop Mounting Brackets
• 2 – #8 x 3/4” screws
1. Using a phillips screwdriver and #8 x 3/4 inch screws, attach both horizontal stands (supplied)
to the back of the speaker.
2. Turn the bolts in the horizontal stands to level the speaker or to adjust the angle.
TROUBLESHOOTING
SOLUTION
PROBLEM
No Sound from One
or More Speakers
No Sound
Lack of Bass or
Dislocated Image
• Make sure receiver, preamp or amplifier is plugged in and turned on.
• Check power outlet at the wall is working.
• Are headphones plugged in, or is the system on Mute?
• Re-check all connections.
• Check your balance control.
• Check that all power cords are properly plugged in and functioning.
• One or more speakers may be connected out of phase
(their polarity is reversed).
• Re-check to ensure that each speaker’s cable is connected with
correct polarity: red (+) to red (+) and black (-) to black (-).
