7
USP INTERFACE CONFIGURATIONS
CJ01*
Novell At type with 3.5 mm stereo jack
CJ02
Novell PS/2 type with mouse port connector
CJ03
Altos Unix/Pick/ Xenix with ¼ stereo jack
CJ04
Same except for 2-minute warning response
CJ05
DTS Servers running Banyon Vines
CJ06
Servers running Banyon Vines/286,Vines/386
CJ07
Prime 2350/2450
CN01
3 Com 3S/400
CN02
SCO Xenix with Netsavers** Software
SJ01
Convergent /Unisys
SJ02
Altos with GNJ Upshut*** Software
SJ03
Microsoft LAN Manager
SJ04
Convergent Might Frame/Miniframe
UJ01
IBM AS/400 System 9406
UJ02
IBM AS/400 System 9404
*This interface configuration functions with existing Novell UPS monitoring board, SS Keycard or
Disk Coprocessor Board. Para Systems Monitoring Board (MBI) is available for new installations
which do not already have an add-on monitoring board.
**Software sold separately by Sutton Designs, Ithaca, NY
*** Software sold separately by GNJ Corp. Silver Springs, MD.
MINUTEMAN PROBLEMS
If problems occur with you MINUTEMAN, first check the items listed below under
TROUBLESHOOTING. If, after reviewing the TROUBLESHOOTING section and taking
appropriate action the problem persists, contact your supplier or Para Systems, Inc. customer
service department. Prior to calling for service, please write down and be prepared to discuss all
unit light indications in each mode (AC and battery), alarm indications and whether or not the unit
supplies output power in each mode.
TROUBLESHOOTING
1. PROBLEM:
Unit will not operate in AC Mode
Probable causes:
a.
No power available at commercial receptacle.
b.
Commercial voltage is out of range. If voltage is out of range,
report the problem to your local utility company.
