PARA Dox Digiplex DGP-620, User Manual

Page: 11 / 54

LED Keypads 9
In Area Status Display the following will illuminate for the area
selected:
•
The Area Symbol (A1, A2, A3, and A4) if the area is armed.
For example, if you press , and Area 3 is armed, [A3] will
illuminate.
• The Numerical Symbols representing any open zones. For
example, if zone 6 was open, then the Numerical Symbol
[6]
would illuminate.
• The [
MEM
] Symbol if any alarms have occurred
• The [
TRBL
] Symbol if any troubles are occurring
• The [
STAY
] Symbol if the area is Stay or Instant Armed
• The [
FORCE
] Symbol if the area is Force Armed
• The [
BYP
] Symbol if zones are bypassed
• The state of the “Status” Light
How do I see the status of the zones?
1) Enter your [
ACCESS CODE
]
2) Press the numbered button corresponding to the desired area:
= Area 1 = Area 3
= Area 2 = Area 4
3) The keypad will emit a Confirmation Beep and will remain in that
Area’s status for two minutes then return to Normal or
Confidential Mode. You can perform the next desired action
from Area Status Display.
KLEDEU03.fm Page 9 Friday, May 4, 2001 11:25 AM