![PAR PHYSIO-PORT Operator'S Manual Download Page 28](http://html1.mh-extra.com/html/par/physio-port/physio-port_operators-manual_3549989028.webp)
28
PHYSIO-PORT / PHYSIO-PORT AS
A8136 Revision A
Electromagnetic Compatibility (EMC)
Guidance and Manufacturer’s Declaration—Electromagnetic Immunity
The PHYSIO-PORT devices are intended for use in the electromagnetic environment specified below. It is the
responsibility of the customer or user to ensure that the PHYSIO-PORT devices are used in such an environment.
Immunity Test
EN/IEC 60601 Test Level
Compliance
Level
Electromagnetic environment—
Guidance
Electrostatic discharge
(ESD) to EN 61000-4-2/
IEC 61000-4-2
±8.0 kV contact
±2.0 kV air
±4.0 kV air
±8.0 kV air
±15.0 kV air
±8.0 kV
±2.0 kV
±4.0 kV
±8.0 kV
±15.0 kV
Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least 30%.
Electrical fast transient/
burst to EN 61000-4-4/
IEC 61000-4-4
±2.0 kV for power supply
lines
±1.0 kV for input/output
lines
not applicable
not applicable
Mains power should be that of a
typical commercial or hospital
environment.
Surge to EN 61000-4-5/
IEC 61000-4-5
±0.5 kV differential mode
±1.0 kV differential mode
±0.5 kV common mode
±1.0 kV common mode
±2.0 kV common mode
not applicable
not applicable
Mains power should be that of a
typical commercial or hospital
environment.
Voltage dips, short inter-
ruptions and voltage
varia-tions on power
supply input lines to EN
61000-4-11/
IEC61000-4-11
0 % power supply
for 10 ms (0.5 cycles)
0 % power supply
for 20 ms (1,0 cycles)
70 % power supply
for 500 ms (25 cycles)
0 % power supply
for 5000 ms (250 cycles)
not applicable
not applicable
not applicable
not applicable
Mains power should be that of a
typical commercial or hospital
environment. If the user of the
PHYSIO-PORT devices requires
continued operation during power
mains interruptions, it is recommended
that the PHYSIO-PORT devices are
powered from an uninterruptible power
supply or a battery.
Power frequency (50/
60 Hz) magnetic field to
EN 61000-4-8/IEC
61000-4-8
30.0 A/m
30.0 A/m
Power frequency magnetic fields should
be at levels characteristic of a typical
location in a typical commercial or
hospital environment.