GB
2.2. Connecting Switch on/ off wire (No.24) and engine.
3. Assemble the handle on the machine. First release the inner hex screws, second take
underside handle on the shaft, last assemble the upper side handle tighten the inner screws
enough.
4. Assemble the safe guard. Release hex screws on safe guard fixed base, and then fix the
safe guard with hex key and wrench enclosed as standard accessories for tightening the
nuts enough.
Warning!
Use only original manufacturer's replacement parts, accessories and attachments.
Failure to do so can cause poor performance, possible injury and may void your warranty.
Never use the machine without the guard assembled!
5. Assemble the cutting head.
5.1.
Release the nut.
Line up the two holes of flange and shield, use one hex key to hold the
flange as below and turn the socket wrench clockwise, the nut will be released.
25
