INSTRUCTION
OF
PROGRAM
SETTING ON THE TIMER
A.
BUTTONS ON CONTROL PANEL :
Button Menu/O.K.
: Start program setting / Confirm
program set up
Button Item
: Selection and switch of setting modes
Button Zone1 On/Off
: Increment of digital value /
Sticking icon of raindrop to the selected day of week
Button Zone2 On/Off
: Decrement of digital value / Not
stick icon of raindrop to the selected day of week
B.
SETTING SEQUENCE OF TIMER :
First time setting
When battery is installed, days of week from Monday(MO) to Sunday(SU) and titles of START,
RUN TIME, MIST CYCLE, CYCLE TIME are all shown on display screen.
(a)
Cursor under MO is blinking which means beginning the setting mode of days of week, press
Zone
1
or
Zone 2
button to select the current day of week and press button
Item
to save your selection.
Cursor stops blinking, then program proceeds further to set the current time (the hour figures start
flashing).
(b)
Set the TIME:
The hour reading is flashing: press button
Zone 1
to increase the digital value (or press button
Zone 2
to decrease the digital value) until the current hour is entered, press button
Item
to save the
value. Subsequently, minutes reading is flashing: press button
Zone 1
to increase the digital value
(or press button
Zone 2
to decrease the digital value) to set the current minutes and then press
button
Item
to save the value.
Now, the current time is set and program proceeds further to set the START TIME automatically.
(c)
Set the START TIME:
The reading of “12” is flashing and press button
Zone 1
to increase the digital value (or press
button
Zone 2
to decrease the digital value) until the selected hour is entered, press button
Item
to
save the value.
Subsequently, minutes reading is flashing: press button
Zone 1
to increase the digital value (or
press button
Zone 2
to decrease the digital value) to set the selected minutes and then press button
Item
to save the value.
Now, the START TIME is set and program proceeds further to set the RUN TIME automatically.
(d)
Set the RUN TIME:
The reading of “10” is flashing and press button
Zone 1
to increase the digital value (or press
button
Zone 2
to decrease the digital value) until the selected watering minutes is entered, press
button
Item
to save the value. <the digital values range is from 1~199min>
Now, the RUN TIME is set and program proceeds further to set the MANUAL RUN TIME
automatically.
(e)
Set the MANUAL RUN TIME:
The reading of “30” and “hand symbol” are flashing and press button
Zone 1
to increase the digital
value (or press button
Zone 2
to decrease the digital value) until the selected minutes is entered,
press button
Item
to save the value. <the digital values range is from 1~60min>
Now, the manual run time is set and program proceeds further to set the MIST CYCLE
automatically. You
will find the selected values of manual run time disappeared, and the value returns to the set RUN
TIME.
(f)
Set the MIST CYCLE TIME:
If you want to set the (RUN TIME) for shortest periods, select 100%. It means a continuous
watering system for the entered RUN TIME.
