manualshive.com logo in svg

PAP Team THOR250, User Manual

Looking for a detailed User Manual for the PAP Team THOR250? Look no further! Download our comprehensive manual for free at manualshive.com and get all the information you need to operate and maximize the potential of your THOR250. Get yours now and harness the power of your device!

Share
Download
background image

See manual of the Polini Thor 250

For information about the running of the engine, fuel recommended, reductor oil, maintenance, warranty, etc.

WATER RADIATOR TEMPERATURE SENSOR

4

If you have the option 
of the TTO for liquid 
temperature, you will have 
to connect the plug after 
installing the radiator. 

ONLY IN ENGINES WITH FLOAT CARBURETOR  ( THOR80 / 200 / 250)

GASOLINE TAP

3

CLOSE WHEN 
TRANSPORTING 
THE PARAMOTOR 
IS LYING DOWN.

OPEN

CLOSE

STARTING TECHNIQUE WITH FLASH STARTER.

5

These starters are a little more fragile than the conventional starters if not used correctly.

The strong dry pull is absolutely prohibited the movement should be a stretch of the arm in two times.

Pull the pulley slowly  until bringing the piston to its point of compression, let the pulley go back and immediately 
pull the pulley to unroll completely. It’s possible to have to repeat this various times for the engine to start.

Summary of Contents for THOR250






Reviews:

No comments

Related manuals for THOR250

Brands by name

Popular brands

Load more brands