INSTRUCTIONS WHEN RECEIVING THE THOR250 ENGINE
1
When receiving your paramotor with the
Thor250 engine you will have to reinstall
the radiator on his support tight in the
6mm bolt
(fig 1)
.
Then you will have to connect the long tube
to the pump
(fig 2)
and the other one on
the Top of the head cylinder
(fig 3)
: take
care not to loose or damaged the O ring
gasket
(fig 4)
.
Everything is connected so now you have
to fill the circuit with aluminum radiator
liquid which can be found in gas station and
motorbike shops.
The amount is approximately 1,2 L.
You will have to fill until 1/3 of the small bottle
(fig 5)
which is on the top of the radiator.
After starting the engine, open the bottle to
control the cooling liquid level.
(fig
01
)
(fig
02
)
(fig
03
)
(fig
05
)
(fig
04
)
(fig
01
)
