Paoli Avvitatori DP 1800, Operating And Maintenance Manual

Page: 14 / 52

ITALIANO ENGLISH
CAUTION
When you use compressed air tools, always
check that the safety regulations which apply
in your workplace are respected, as well as
those in the following instructions, in order to
reduce the risk of environmental and personal
damage.
w Wear safety glasses and hearing protection.
w If necessary, wear dust mask and gloves.
w Wear suitable working clothes and safety
shoes.
w Do not use the tool continuously, do a
break periodically
For operator safety:
Keep the work area clean.
An untidy workplace
or bench may cause personal damage.
Check the conditions of workplace.
Check
that the lighting is adequate. If the materials
being worked produce sparks, do not use the
tools in the presence of inflammable liquids,
gases or material.
Do not use the tool in potentially explosive
atmospheres (ATEX).
Keep unauthorised persons at a safe distance.
Do not let them touch the tools. Visitors should
be kept away from the workplace.
Do not overload the tools.
They will work
better and in safe conditions if they are fitted
with suitable tubing and are used at the
pressure indicated in this manual.
Use the right tool.
Check the conditions of
the working tools (impact sockets, etc.) before
each start-up and replace if damaged or worn.
Improper uses and absolutely forbidden:
w Use the tool for any purpose and uses
different from that required in this manual
w Direct the tool or other accessories against
people or animals
w Use the tool or accessories like hammer,
lever or blunt object
Wear suitable clothing.
Do not wear clothing
or jewellery which could get caught in moving
parts. Protective gloves and non-slip safety
shoes should be worn when working outside.
Long hair should be kept in a hairnet.
Use personal protection.
Your should always
wear noise-proof ear protection, safety goggles
with de-mist screen, work gloves, filtered
mouth mask and anything else necessary to
prevent contact with harmful substances and
sub-products of the working process.
Connection the power supply.
This should always
be done in respect of local safety regulations. In
the case of compressed air, care should be taken
to avoid whiplash (in case of tube breakage), or
accidental unplugging, and the danger of short
circuiting for electrical connections.
Risks of discharged air containing lubricator
or residues.
Avoid excessive lubrication and
inhaling the discharged air; the work place
should be equipped with conveyor ducts for
the discharged air where necessary.
Check that the mains electricity supply
complies with
safety regulations and the
requirements stated in the instructions manual
before connecting up.
Connect the equipment for dust extraction.
If
the equipment for dust collection is included,
check that these are connected to the tools
and used correctly.
14