manualshive.com logo in svg

Pantograms GS1501, Owner'S Manual

The Pantograms GS1501 Owner's Manual is a comprehensive guide that provides users with all the necessary information to use and maintain their embroidery machine. This manual is available for free download from our website, ensuring easy access to valuable resources without any hassle.

Share
Download
background image

TA

BL

E O

F C

O

N

TE

N

TS

1

Welcome

Congratulations on the purchase of your GS1501 Embroidery Machine and becoming part of the Pantograms 
team. This JUMP START kit includes all the necessary information to help you get started as quickly and eas-
ily as possible. After reading this manual, be sure to watch the enclosed CD about our Forté software.

GETTING STARTED (section 1)

Service and Support .................................................................................................................................

1-1

Unpacking Your GS1501 Embroidery Machine ........................................................................................ 2,3
Setting Up Your GS1501 Work Station ............................................................................................... 4,5,6,7
Setting Up Your GS1501 Embroidery Machine .....................................................................................8,9,10
Threading the GS1501 .................................................................................................... 11,12,13,14,15,16,17
Attaching the Tubular Arms ...............................................................................................................18,19,20
Tracing the Design ...............................................................................................................................  21,22
Installing the Cap Driver and Embroidering the Test Cap Design ..............................................23,24,25,26
The GS1501 Control Panel .............................................................................................................. 27,28,29
Hooping Material on a Round Hoop .......................................................................................................... 30
Installing Forté Embroidery Suite Software ............................................................................................... 31
How to Load a Job ..................................................................................................................................... 32

EMBROIDERY BASICS (section 2)

Stitch Formation ........................................................................................................................................

2-1

Needles ........................................................................................................................................................ 2
Thread .......................................................................................................................................................... 4
Bobbins ........................................................................................................................................................ 5
Backing  ..................................................................................................................................................... 6,7
Stitch Troubleshooting.................................................................................................................................. 8
Needle, thread and Stabilizer Chart  ............................................................................................................ 9
Tension ........................................................................................................................................................11
Hoops  ........................................................................................................................................................ 12
Hooping Aids .............................................................................................................................................. 13
Tools   .....................................................................................................................................................14,15
Hooping Technique ................................................................................................................................16,17
Hooping a Structured Cap ......................................................................................................................... 18
Hoopless Frame Technique ....................................................................................................................... 19
Hooping a Large Item or a Jacket Back ..................................................................................................... 20
Attaching a Large Hoop to the GS1501 ..................................................................................................... 21
Hooping a Satin Jacket .............................................................................................................................. 22
Common Hooping Problems ...................................................................................................................... 23
Embroidery Placement ....................................................................................................................  24,25,26
Anatomy of a Cap ....................................................................................................................................... 27

MACHINE BASICS (section 3)

GS1501 Embroidery Machine ...................................................................................................................

3-1

Setting the Upper Thread ............................................................................................................................. 3
Bobbin Placement in Case ........................................................................................................................... 4
Common Adjustments - Thread Breaks  ...................................................................................................... 5
Setting the Upper Thread Tension  .............................................................................................................. 6
Thread Looping  ........................................................................................................................................... 7
Cleaning the Machine .................................................................................................................................. 7
GS1501 Control Panel .................................................................................................................8,9,10,11,12
Oiling the GS1501 ............................................................................................................................. 13,14,15

Summary of Contents for GS1501





























































































Reviews:

No comments

Related manuals for GS1501

Nilfisk-ALTO 56380065(443) Instructions For Use Manual preview
56380065(443)
Brand: Nilfisk-ALTO Pages: 84
Pfaff EXPRESSION 2028 Brochure preview
EXPRESSION 2028
Brand: Pfaff Pages: 4
Pacific FM-17DS Parts & Operating Manual preview
FM-17DS
Brand: Pacific Pages: 8
Thomas 275 SUPER CUT Use And Maintenance Manual preview
275 SUPER CUT
Brand: Thomas Pages: 24
Azkoyen Argenta Programming Manual preview
Argenta
Brand: Azkoyen Pages: 88
YARDMAX YP7065 Operator'S Manual preview
YP7065
Brand: YARDMAX Pages: 28
AEG PE3811-M Instructions Manual preview
PE3811-M
Brand: AEG Pages: 30
thomann STAIRVILLE AF-X 790 DMX User Manual preview
STAIRVILLE AF-X 790 DMX
Brand: thomann Pages: 60
MK Diamond Products MK-SDG-7 Owners Manual, Parts List & Exploded View preview
MK-SDG-7
Brand: MK Diamond Products Pages: 16
Nilfisk-Advance Advance 9087381020 Service Manual preview
Advance 9087381020
Brand: Nilfisk-Advance Pages: 99
Bonis Brothers Bonis 3000 Owner'S Manual preview
Bonis 3000
Brand: Bonis Brothers Pages: 11
Singer 242-1 Instructions Manual preview
242-1
Brand: Singer Pages: 9
Singer 247-2 Parts List preview
247-2
Brand: Singer Pages: 39
Singer 25 Parts List preview
25
Brand: Singer Pages: 55
Frister Rossmann Panda 6 MKII Instruction Manual preview
Panda 6 MKII
Brand: Frister Rossmann Pages: 46
VETRON 5064 Service Manual preview
5064
Brand: VETRON Pages: 95
Singer VS1 Directions For Using preview
VS1
Brand: Singer Pages: 36
NatComm DMS User Manual preview
DMS
Brand: NatComm Pages: 16

Brands by name

Popular brands

Load more brands