Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se
keeps you moving
Adjustment for 20” and 18” rear wheels
Adjusting the brake force
Adjusting the rear axle
1. Unscrew the locking lever with the adjustment nut.
2. Turn the locking lever over (together with the adjustment nut) and screw the parts onto
the locking lever again.
1. Screw the locking lever in- / outwards using the adjustment nut to adjust the pressure to
the rear wheel.
2. NOTE! On the locking lever (pos.4 in the exploded view) there are a mark for max. ad-
justment outwards (do not unscrew the locking lever to far, so that you see the line after the
arrow, (as in the image below)
The rear axle can be moved to change the center of gravity for the wheelchair. For the anti-
roll device to still work properly, it can be moved to the following distances.
