Introduction
Made for moving plywood and long lumber, this
500 lb. capacity material cart has outrigger style
5" casters for maximum stability, and measures
42" long x 28
1
⁄
2
" wide x 35
3
⁄
8
" high. The plywood
deck measures 38
1
⁄
2
" long x 16" wide.
Inventory
Base Assembly .................................................. 1
Tubular Cart Sides ............................................ 2
5" Casters .......................................................... 2
5" Left-Side Braking Casters ............................. 2
Hex Bolts M8-1.25 x 20 (Casters) ................... 16
Lock Washers 8mm (Casters) ......................... 16
Flat Washers 8mm (Casters) .......................... 16
Hex Nuts M8-1.25 (Casters) ........................... 16
Hex Bolts M8-1.25 x 40 (Cart Sides) ................ 4
Fender Washers 8 x 35 x 3mm (Cart Sides) .... 4
Assembly
1.
Attach the casters to the base assembly
with the M8-1.25 x 20 hex bolts, hex nuts,
flat washers and lock washers, as shown
in
Figure 2
. Both braking casters should
be installed at the same end of the cart, as
shown in
Figure 1
.
2.
Slide the tubular ends of the cart sides into
the support sockets located on the cart
assembly, and fasten with the M8-1.25 x 40
hex bolts and fender washers as shown in
Figure 2
.
3.
If you have difficulty moving your cart, check
to see if the casters are locked in the horizon-
tal "brake" position. Simply move the brake
into the diagonal "free" position (
Figure 3
) to
restore movement to the caster.
MODEL H7544
MATERIAL CART
INSTRUCTION SHEET
Figure 1.
Model H7544.
If you need help with your new material cart, call
our Tech Support at: (570) 546-9663.
COPYRIGHT © MAY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JK8258 PRINTED IN CHINA
Figure 2.
Model H7544 detail, showing caster in
diagonal "free" position.
Lock
Washer
Hex Bolt
Flat
Washer
Hex Bolt
Fender
Washer
Caster
Brake
