W8729 - All Purpose Equipment Cart™
Assembly Instructions
Components:
A – Wheeled Base (1) with (4) wheels / casters
B – Lower Vertical Post (4)
C – Horizontal Mid Section (1)
D – Vertical Panels (2) – includes 2 vertical post and fabric
panel
E – Top Section (1)
F – Bungee Cords (16) – 35” long (includes 2 extra cords)
G- Bungee Cords (2) – 48” (optional vertical cords) not shown
Instructions:
1. Insert a short vertical post “B” into each corner of the wheeled
base “A”
2. Place horizontal mid section “C” over the 4 short vertical post and
press down.
3. Insert a vertical panel “D” at either end of the cart by
inserting one post into each corner of the horizontal mid section
“C”. Be sure that the holes in the vertical post are aligned with
the holes in the vertical fabric panels and that the holes are
towards the outside of the cart.
D
C
A
E
F
B
Create the wheeled base by inserting a
caster/wheel into each corner of the pre-
assembled base. Note that components “A”
and “C” use the same pre-assembled section.
