Pantech PG-1210, User Manual

Page: 15 / 84

15
Display Off Mode.
If you do not press any key within a minute while the internal and
external displays are dimmed, the internal display goes into Off Mode to
save power. Press any key to restore the display.
Selecting Functions and Options.
The phone provides several customisation functions, which are arranged
in menus and sub-menus. You can access these functions using the two
Soft keys ([ ] and [ ] key).
Each menu and sub-menu allows you to view and change the settings of
the particular function.
The soft key function varies depending on the current context; the labels
or icons at the bottom line of the display indicate the current function.
To view various functions/options available or select the one that is
required:
1. Press the appropriate Soft key.
2. To select the function displayed or option highlighted, press the [ ]
Soft key or the [ OK ] key.
3. To highlight the next option on a list, press the Up key or Down key.
4. To move back to the previous function or option on a list, press the [C]
key
5. To return to Standby Mode, press the [ ] key.
In some functions, you may be prompted for a password or PIN. Enter
the required code and press the [ OK ] key.(default password : “1234”)
External Display [2.2]
The following section describes the external display screen and easy-to-
control external menus and their functions.
Side Up
- Adjusts the earpiece volume during a call and moves the
cursor up in the menu.
- Mutes the ring tone if pressed upon an incoming call.
- Rejects the incoming call if pressed and held upon an
incoming call.
Side Down
- Adjusts the earpiece volume during a call and moves the
cursor down in the menu.
- Mutes the ring tone if pressed upon an incoming call.
- Rejects the incoming call if pressed and held upon an
incoming call
Extra Key
- Turns the camera capture mode on, if pressed and held.
- Works as a camera shutter in the capture mode.
Side Key Special Functions.
1. Snap Shot
Close the folder to initiate the camera function.
Press and hold the side [ ] key to activate the camera mode.
Press the [ ] key again to take a photo. And then, the image
taken will be displayed on the screen. At this time, press the [ ]