PG-1210 Service Manual
6.4 Charger part
6.4.1 Charging error
Insert adaptor into I/O jack.
1.
Check to see if F101, D101 pin is 5.2V : CP128
NO Check to see J101.23, 24(I/O connector) pin and F101, D118 cold solder, broken,
short to the other PCB pattern or not :
If you find out any defect, you replace it
2. Check to see U408 No.1,2 pin is 5.2V : CP129
NO
Check to see U408, R223, and R221 cold solder, broken, short to the other PCB
pattern or not
If you find out any defect, you replace it
CP128
CP129
CP128
35
PANTECH
