26
GETTING STARTED
USING THE HEADSET JACK
You can control your device’s accessories by inserting the connector
into the 3.5mm Headset Jack on your phone.
Note
Stereo earphones that support common call
management features including making and answering calls
may not have been standardized. Therefore, the phone may
not be compatible with some stereo earphones.
GRIPPING ADR910L
It is strongly recommended that you hold the ADR910L in the right
position for a call as indicated below:
Correct
Incorrect
x
Make sure not to block the antenna embedded in the ADR910L.
Check the location of the antenna on the illustration on page 24.
