ⓒ
2009 by Panarex Electronics
30
V
. TROUBLE SHOOTING
There may be various reasons for the abnormal of the unit. Therefore, if the unit does not
work properly,
Check the unit according to the procedures shown in the table below.
Problem
Possible causes
Remedy
LED on front panel
Does not light
AC Power cord disconnected Connect power cord properly
into the power socket
No Picture or Sound
Wrong connection of the
Video/audio output to TV
input Terminal
Wrong connection of antenna
cable
Wrong direction of antenna
No signal or weak signal
Wrong setting of channels
Information in MENU screen
Connect two terminals
correctly with component
cable, RCA or RF cable
Connect the antenna cable
Correctly
Adjust the direction of
antenna
Check the cable connections,
Type the setting value
correctly
Black-and-white
Screen or V-Hold
Your TV mode is different
from broadcasting mode
Use TV of same mode
Use the NTSC/PAL converter
Connection to the receiver
and TV
The remote
controller is not
working
Battery exhausted
Fluorescent light interfering
with the remote controller
Remote controller is
incorrectly aimed
Change the batteries
Switch off the light
Aim the remote control at the
receiver
Distorted menu
screen
Too high brightness and
contrast level of TV set
Adjust brightness and
contrast to low level
Not working
Process Down
Remove the power code or
AC switch OFF/ON
