ⓒ
2009 by Panarex Electronics
22
5. System Setup
5.1 System Information
Show the information of model name, data and
version of STB.
5.2 Factory Setting
Once the Factory setting is selected and chooses “Yes” and type password by pressing
4-digit numeric keys followed by OK key, whole parameters will be changed to the
default value written in the factory. If you do not want to continue this mode, press [EXIT]
key before you enter password.
Common password is “0000”. In case selected password is forgotten, call Pansat’s
dealer to get factory master password.
You can select factory setting as follows :
(1) Default setting “Channel Data”.
(2) Default setting “All Data”.
