Motorized Screen Set-Up Guide | 7
SCREEN ADJUSTMENT
Note: Adjustments to screen limit positions, can only be performed by a
trained technician.
Screen travel is stopped automatically in the down and up positions by limit
switches that are preset in the factory. If it Is necessary to adjust for more or
less, please follow the steps below for adjustment.
Disconnect the power supply first before any operation. Remove the plate on
right bottom side of screen housing.
PLATE
This is important.
Before the adjustment, loosen the fastening screw (F).
The upper limit switch is on the left side and the bottom limit switch is on the
right side.
After all the adjustments, tighten the fastening screw (F).
LEFT SCREW(LS)
RIGHT SCREW(RS)
FASTEN SCREW(F)
FR
FL
