© 2001 PANORAMAdtv ALL rights reserved
5
VAMP-24
User Manual P/N
821515
Rev-
C
Peak Acoustic Output:
Electrical Response:
Acoustic Response,
6th Octave:
Speaker Amp
Power Output:
Distortion (electrical):
Distortion (acoustic):
Hum and Noise:
Level Meters:
100 dB SPL (@ 2 ft.)
20Hz -20kH (+/- 1dB)
170 Hz - 16 kHz (+/- dB)
(-10 dB @ 140 Hz, 20 kHz)
20 W Transient / 11 W
Continuous RMS each side
(4 ohm)
Less than 0.1% at any level
below Limit Threshold
Typically less than 1.5% at
frequencies above 200 Hz;
6% or less at worst case
More than 70 dB below full
output
53-segment, high-resolution,
tri-color (red/yellow/green)
LED bargraphs
Applications
The VAMP-24 is ideally suited for monitoring of multiple video feeds in VTR bays, mobile production
vehicles, news and transmission control rooms, and duplication and post production applications. Designed and
manufactured in the U.S., the VAMP-24 is backed by a strong warranty and a satisfaction guaranteed return
policy.
Units are certified to meet, at time of manufacture, all currently applicable product safety and EMC requirements, such as those of UL
and CE. 0 dbV ref. 0.775V RMS. Features and specifications subject to improvement without notice.
General Specifications
Section 1: General Features and Specifications
Input:
Display Resolution:
Screen Type, Size:
Controls:
Composite Analog - IV pk-pk NTSC/
PAL Auto-sensing
480H x 234V
TFT 4" Diagonal
Brightness, Chroma, Tint (NTSC only),
and Contrast
100/250-VAC, 50/60 Hz Auto
Select
60W
3.5 x 19 x 12 inches
(89 x 483 x 298mm)
17 lbs Approximately
(7.7kg)
VAMP-24 Rear Panel
AUDIO SPECIFICATIONS
VIDEO SPECIFICATIONS
Power Requirement:
Power Consumption:
Dimensions (HxWxD):
Weight:
GENERAL SPECIFICATIONS
