PANNOMED VET LIFT 7H9.6P1, Instruction Manual

Page: 17 / 27

Instruction Manual VET LIFT
Page 17 of 27
Version 2.02
Error handling & Troubleshooting
This section describes how to proceed if a problem or error occurs with your
panno-med
product. Please follow the steps and recommended actions in detail.
In case none of the described solutions and recommendations achieve the desired result or
eliminate the existing problem, as well as in case of any further queries, please contact the
authorized distributor from whom you purchased your
panno-med product. For exact
identification of your product, be sure to cite the serial number (starting with 14-...) of the
product in question, which is located on the type plate.
Potential error Recommended course of action
At least one electric actuator
does not work
o
Check if the battery (if applicable) is inserted as well as
whether the electrical power supply to the product is
provided.
o
Ensure that the battery is fully charged or that the socket
through which you want to supply electrical power to the
product is actually connected to electricity.
o
Verify that all cables and electronic components,
operating elements, etc. are correctly connected to the
respective control unit and that no cable has been
unplugged.
o
Inspect the electronic components as well as cables for
possible cracks, crushing or other damage that could
prevent the electrical actuators from functioning correctly.