Panlab Rotarod LE8205, Hardware User Manual

Page: 11 / 31

Rotarod
10

Reset button : Clears the lane counters indicators to zero.

Speed increase/decrease button : Increments/decrements by one unit the rod
speed. Applies only to constant speed working mode.

Speed screen : Displays the Set Speed screen. Applies only to constant speed
working mode.

Ramp screen : Displays the Set Ramp screen. Applies only to acceleration
working mode.
6.2. REAR PANEL
Figure 3. Rear Panel

USB: USB B-type female connector used to connect the Rotarod to a
computer Com port. Data is sent to the Sedacom software through this
connector.

POWER: Male panel jack used to connect the Rotarod to the AC-DC adapter.

SWITCH: Main switch used to turn on and off the Rotarod.
USB POWER SWITCH