Panio HD4420K, User Manual, Page: 9 / 12

9
Baud rate: 115200
Data bit: 8
Stop bit: 1
Check bit: None
Command Explanation Feedback
Power
s power z!
power on/off the device,z=0~1
(z=0 power off, z=1 power on)
power on
System
Initializing...
Initialization Finished!
power off
r power! get current power state power on /power off
s reboot! reboot the device
Reboot…
System
Initializing...
Initialization Finished!
SYSTEM Setup
r status! Get device current status
Get the unit all status:
power, beep, lock, in/out
connection,
video/audio
crosspoint, edid,
scaler,hdcp, network status
r link in x!
Get the connection status of the x input port,
x=0~4(0=all)
HDMI IN1: connect
r link out y!
Get the connection status of the y output port,
y=0~4(0=all)
HDMI OUT1: connect
s beep z!
Enable/Disable buzzer function,z=0~1(z=0 beep
off, z=1 beep on)
beep on / beep off
r beep! Get buzzer state beep on / beep off
s lock z!
Lock/Unlock front panel button,z=0~1(z=0 lock
off,z=1 lock on) panel button lock on
panel button lock off
r lock! Get panel button lock state panel button lock on/off
s save preset z!
Save switch state between all output port and
the input port to preset z
，
z=1~8
save to preset 1
s recall preset z! Call saved preset z scenarios
，
z=1~8 recall from preset 1
s clear preset z! Clear stored preset z scenarios,z=1~8 clear preset 1
r preset z! Get preset z infomation, z=1~8 video/audio crosspoint
s baud rate xxx!
Set the serial port baud rate of RS02 module,
z=(115200,57600,38400,19200,9600,4800)
Baudrate:115200
r baud rate! Get the serial port baud rate of RS02 module Baudrate:115200