8
CEC page:
You can perform CEC management on this page:
① Input Control: You can control the operation of each input source by pressing the icons
on the page. (You can control multiple inputs simultaneously.)
② Output Control: You can control the operation of each display, such as power on/off,
/-, active source switching. (You can control multiple outputs simultaneously.)
Note that the IP address boxes are only accessible when the Mode button is set to Static.
The log in passwords can be changed on this page.
Note that any changes to this page will require the new details into the web browser and/or the log in
screen.
System page:
The system page allows setting of the panel lock and beep on/off, control RS-232 port baud rate.
This page is also used to install new firmware update, restore the factory default settings and reboot
the Switcher.
COM Control Commands
RS232 cable with straight-through connection(USB-RS232 can be used directly to control)
Communication protocol:
Summary of Contents for HD4420K
Page 1: ...1 PANIO HD4420K User manual...
Page 12: ...12...