PANHANS 690, Operating Manual

Page: 42 / 77

BA_PH_690-100_EN_10-22.docx
42
13 Operating the 4.7" Touch Display
The 4.7" touch display visualises the height and tilt of the saw blade as well as the selected speed.
13.1 Start Screen
Figure 32: Start screen
•
To be able to operate the machine, press the “ Machine ” symbol (see section

13.4).
•
The “ Setup ” menu is password -protected and not relevant for the operator.
13.2 Status Window
To open the status window, press the icon .
Figure 33: Status window
State / Symbol Meaning
E-STOP Lights up green if emergency stop chain ok or red if malfunction in emergency stop chain.
RELEASE
Monitoring of the voltage release for the adjusting motors of the two axes.
→
The field must light up when one of the two positioning buttons is pressed.
K2 Status message “Main Motor running”
Up / Down Hardware test of buttons up/down (height)
→
Lights up when the resp. button is pressed
+/- Hardware test of b/- (angle)
→
Lights up when the resp. button is pressed
Speed Sensor Indicates the V-belt position of the speed sensor
Logging
Displays present errors and faults as text (present = red / remedied = green)
Flag Open the language menu / switch the language (see next section 13.3)
Home Jump back to the previous level