BA_PH_690-100_EN_10-22.docx
19
•
Use a ram plate on the slide table when “trimming”
.
•
Use an aluminium profile rail with a narrow contact edge for cutting narrow and low batten.
•
For cross-cuts use a cross-cut table with cross-cut fence.
•
Use a deflector wedge to cut battens to length.
•
Damaged table inserts must be replaced with new ones.
•
When cutting narrow workpieces, use the push stick.
•
Repairs may only be carried out by qualified personnel with the main switch locked.
•
The machine must be connected to an effective extraction unit with a minimum flow rate of 20 m/s.
•
The machine is equipped with an electric magnetic brake. If this brake no longer brakes within the
prescribed braking time (10 s) despite readjustment, the customer service must be informed.
