Polar Bear East/West 10 Degree Installation Manual
9910022 Rev A
5
Polar Bear East/West 10 Degree Components
This is a parts list for a ballasted Polar Bear® East/West 10 Degree installation not requiring mechanical
attachment. Please refer to the PanelClaw Roof Connector Installation Manual, available at
, for instructions on mechanical attachment of the system.
Major Components
EW Support
Low Support
Standard Claw
Other Materials
Fastener Kit
Ballast Block
(Customer supplied)
EW Support
Supports modules at the high side of the tilt and holds up to (6) 4x8X16”
ballast.
Options
May come with preinstalled recycled rubber roof protection pad and or
grounding lug. May be constructed of either aluminum or G90 steel.
Low Support
Supports modules at the low side of the tilt and holds up to (2) 4x8x16”
ballast.
Options
May come with preinstalled recycled rubber roof protection pad and or
grounding lug. May be constructed of either aluminum or G90 steel.
Standard Claw
Includes pre-installed fastener to mount claw to module frame, 3/8-16 x
1.0”L.
Fastener Kit
Stainless Steel 3/8-16 x 1.25” screw and 3/8-16 serrated flange nut to
attach a module with claws to supports.
Ballast Block
Customer supplied solid cap concrete roof paver. Block should conform to
ASTM C 1491-03 standard.
