9910048 RevC
February 2020
6. Install Module Low Side
PAGE
10
Cam Claw aligned
6.1
Cam Seat
Place module on Cam Seat and
align with Array Edge.
Ti
p: Ensure the module is vertical
and flush with Seat.
ALERT: Cam Claw is mis-aligned.
R
Tip:
R dimension is
found in the Racking
Construction Set.
Tip:
Installing modules starting at the south array
edge provides more working room and speeds
installation.
ALERT:
Do not leave modules in vertical position, go
immediately to next installation step (high side install).
Cam Claw
Place Cam Claw over module flange.
Apply a small downward force to
make sure it is properly seated.
6.2
ALERT:
Install Mechanical Attachments before installing modules.
See: 9910047 - Accessories Installation Manual
