© Panduit Corp. 2013
OPERATION MANUAL
WGCT-A
WGCT-A/E
Page: 4 of 10
CAUTION
•
DO NOT operate the tool without cutting blades. Damage to the piston or cutting head can result.
•
DO NOT twist work piece or tool during cutting operation. Blade failure could result.
•
This tool is not designed for continuous use. After 100 cutting cycles, allow the cutting tool to cool for 15
min.
•
DO NOT secure this tool in a vise. This tool is designed for hand-held operation.
•
This tool may be used in damp or wet environments; however, air-drying is recommended before use if the
tool becomes soaked. Damage may result when the tool is operated prior to thorough drying when
electrical components are soaked.
•
Use this tool for the manufacturer’s intended purpose only.
Failure to observe these precautions may result in injury or property damage.
CAUTION
DO NOT allow anything to contact the battery terminals.
•
DO NOT immerse the batteries in liquid. Liquid may create a short circuit and damage the battery. If
batteries are immersed, contact your service center for proper handling.
•
DO NOT place the battery into a pocket, tool pouch, or tool box with conductive objects. Conductive
objects may create a short circuit and damage the battery.
•
DO NOT place a battery on moist ground or grass. Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in injury or property damage.
CAUTION
•
DO NOT store the battery at more than 122°F (50°C) or less then -4°F (-20°C). Damage to the battery can
result.
•
DO NOT use another manufacturer’s charger. Other manufacturers’ chargers may overcharge and
damage the battery.
•
DO NOT attempt to open the battery. It contains no user-serviceable parts.
Failure to observe these precautions may result in injury or property damage.
CAUTION
DO NOT perform any service or maintenance other than as described in this manual. Injury or damage to
the tool may result.
Failure to observe these precautions may result in injury or property damage.
