Remote Logger Unit User Manual
-
15
-
Modbus Devices
The types of digital sensors are:
l
ND MultiCube
l
ND 350
For ND 350
<numslvs>
should be 0.
Limits
The thresholds that can be set are:
l
kWh Upper Threshold
l
kWh Lower Threshold
Limits may be configured as follows:
PWR ALARMSET <id>,<s1lt>,<s1ht>[;<snlt>,<pnht>]...
Values apply to all meter types. Slave channels must appear in address order.
Alarms are enabled by default when configured, but their enable status may be con-
trolled as follows:
PWR ALARMEN <id>,<s1le>,<s1he>[;<snle>,<snhe>]...
Alarm levels and the enable state for a particular meter can be read back as follows:
ENV ALARM <id>
Format for each row as follows:
Low: <threshold>(<en_state>) High: <threshold>(<en_state>)
Note
: There are no lower limits for total energy as energy consumption can only go up
not down.
Input Sensors
The Input Sensor values are all determined by a template for its particular probe type.
Default templates are supplied for some probe types.
