SMARTZONE UPS USER MANUAL
21
U06N11V / U06S11V /U10N11V / U10S11V
The 6 and 10kVA NA UPS units have a terminal block for a hardwire connection on the
input of the UPS. These units have two groups of outputs. Group 1 (hardwire
connection) is the main non-switchable output. This output should contain the critical
loads. Group 2 (2x L6-30R) are switchable outlets. These outlets may be used for non-
critical loads. When the UPS is operating in the battery state, Group 2 outlets may be
programmed to turn off earlier to conserve battery capacity for the Group 1 output.
4. Intelligent Slot
8. DB9 Coms Port
12. EBP Connector
5. Maint. Bypass Signal 9. Battery Temp. Port 13. Group 1 Terminals
6. EPO Signal Port
10. Group 2 Breaker 14. Input Power Terminals
7. USB Coms Port
11. Group 2 Outlets
15. Ground Screw
Figure 5: 6 and 10kVA North American Rear View (U06x11V / U10x11V)
