© Panduit Corp. 2018
OPERATION MANUAL
ENGLISH
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
PA27647A01_05
Page: 47 of 64
12-2018
ERROR > HELP
RE-ADJUST TENSION SETTING
AIR BURST
LOAD
MAINTENANCE
PREVIOUS
BACK
89
Help Screen Step 3
POSSIBLE CAUSE:
Excessively dry or excessive high humidity and high tension conditions causing cable tie and
tool to be locked onto the bundle.
CORRECTIVE ACTION:
Press the
“Silence” icon
to turn the alarm signal "off". Lower the tension setting on the
tool by turning the tension adjustment knob counter clockwise 2 clicks.
Fig. 19
Pull the trigger to cut the tie and eject the tip from the tool. Reset the tension by turning the tension adjustment
clockwise 2 clicks. If the message remains, the system will not operate. Write down the message and notify the
maintenance department.
PREVENTION:
Control Humidity of ties.
ERROR 17 – Full tip collector
ERROR 17 > FULL TIP COLLECTOR
EMPTY. PRESS BACK TO CONTINUE
AIR BURST
LOAD
MAINTENANCE
SILENCE
BACK
91
Error Screen
POSSIBLE CAUSE:
Tip collector is full and contains 300 tips.
TENSION ADJUSTMENT
KNOB
Summary of Contents for PAT1M4.0
Page 2: ......
