29
Network Mode
Creating Labels for 66-Block
You can create labels for 66-Block so that large numbers of
connectors can easily be identified.
Ports number
Separator
Port length
1. Press .
2. Select "66-Block" with
/
and then press
.
3. Select the length type with
/
and then press
.
In this example, we will select "Ports".
Ports
: Sets the length by port length.
Label
: Sets the length by label length.
4. Enter the port length and then press
.
Setting range: 0.1 to 11.81" (0.25 to 30.00 cm)
5. Enter the ports number and then press
.
In this example, we will enter "4".
Setting range: 1 to 50
6. Select the type of separator with
/
and then
press
.
In this example, we will select "Line".
7. Select the orientation with
/
and then press
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
8. Enter the text.
You can create labels with sequence numbers.
For details,
"Creating Labels with Advanced
9. Press
.
