AT-OMNI-512
88
Performing a Link Test
Follow the procedure below to perform a link integrity test between an encoder and decoder(s).
1.
Launch a web browser and enter the IP address of the encoder in the address bar.
2.
Open another tab in the browser and enter the IP address of the subscribing decoder in the address bar.
3. Verify that all desired decoders are subscribed to the encoder’s multicast address and port number. In the
decoder example below, the
IP Input
>
Input 1
>
Multicast address
field is set to
225.0.0.11
. This is the
same IP address that is assigned to the
Session
>
Session 1
>
Destination IP address
field on the encoder.
4. On the encoder, click the
Session
menu.
5. Under the
Video
section, click the
Link test
button.
Appendix
