Panduit Atlona OmniStream AT-OMNI-311, Installation Manual

Page: 2 / 8

2
Installation Guide
AT-OMNI-311
PWR
LINK SIGNAL
HOST
O
MNI
S
TREAM TM
UTILITY PAIRING LAN HOST
AT-OMNI-311
PWR
LINK SIGNAL
HOST
O
MNI
S
TREAM
TM
UTILITY PAIRING LAN HOST
AT-OMNI-311
Panel Descriptions
1 PWR
This LED indicator glows solid green when the unit is powered. This unit is powered by the host device
using USB. No external power supply is required. Refer to
LED Indicators (page 6)
for more
information.
2 HOST
This LED indicator glows green when a USB host device is connected to the unit. Refer to
LED
Indicators (page 6)
for more information.
3 LINK
This LED indicator is solid green when a solid connection between this unit and the receiver has been
established. Refer to
LED Indicators (page 6)
for more information.
4 SIGNAL
This LED indicator monitors data transmission between this unit and the receiver. The LED will blink
intermittently whether or not a USB device is connected. Refer to
LED Indicators (page 6)
for
more information.
5 UTILITY
This port is for factory programming.
6 PAIRING
Press this button to begin the pairing process.
7 HOST
Connect a USB type-B connector from this port to the host computer.
8 LAN
Connect an Ethernet cable from this port to the Local Area Network (LAN).
Front Rear
5 6 7 1 2
3 4
8