AT-OMNI-111 / AT-OMNI-112
13
The same port that provides RS-232 connections also supports bidirectional IR pass-through, allowing a device to
be controlled from either the headend or the decoder endpoint. This step is optional. IR control is only supported on
RS-232 2
port (bottom set of connectors). Refer to
for configuration details.
IR emitter configuration
IR extender configuration
GND (black)
IR emitter
SIGNAL (white/black)
RX TX GND
GND (black)
SIGNAL (white/black)
Control
Unit
TX out
GND
RX TX GND
Installation
IR Connections
Push tab
to unlock
