AT-OME-MS52W
65
5.
The following message box will be displayed. Click the
Ok
button.
Device Operation
The AT-OME-MS52W can be configured to prompt for a PIN code, before a BYOD device connects with either
AirPlay or Miracast P2P. When the this option is enabled, a PIN code will be displayed on the screen when an AirPlay
or Miracast device attempts to connect to the AT-OME-MS52W. Refer to the IT Deployment Guide for definitions of
Miracast P2P (Peer-to-Peer) and Miracast over Infrastructure.
NOTE:
The PIN code will randomly change every five minutes, by default. This value can be set
from 10 seconds to five hours. This provides a level of security, preventing unauthorized users from
accessing the AT-OME-MS52W. Android
™
devices do not support PIN code security.
AirPlay / Miracast P2P PIN Codes
1.
Login to the web server. Refer to
Logging in to the Web Server (page 22)
for more information.
2. Click
Administration
>
Advanced
in the side menu bar.
3. Click the
AirPlay Enable
and
Miracast Enable
checkboxes, as required by the casting device.
4. Under the
BYOD
window group, click the
Airplay/Miracast P2P PIN
checkbox. If this checkbox has a check
mark in it, then the feature is enabled.
Miracast Enable
AirPlay Enable